Help with posting video clips

[MistressValerie1]

Click on "new thread" on the upper left of the screen, then the basic form will come up. Put in the title and the body of your post. Then you will notice below the body of the post (scroll down) you will see a button that says "manage attachments"; click on that. The next screen to come up will allow you to post clips. Click on the browse button and navigate to where the clip is on your computer, select it and click OK. Brings you back to the upload screen, then just select upload and wait a minute while the clip uploads. After that you will see your attachment associated witht he post, then just submit the post.

Step by step..........

1. Click the Manage Attachments link located in the new thread/post you're creating.
2. Wait for the popup window to load. If you use a popup blocker you may want to disable it just while you upload.
3. Once loaded click on the Browse button to navigate to the file on your computer you wish to upload.
4. When the desired file is selected and ready to be loaded click on the Add This File button.
5. Wait for the file to upload from your computer. The amount of time varies depending on file size. Additionally, I've found that files above 2mb do not load properly.
6. You will know the file is loaded when you see a Current Attachments table come up underneath the one you were just using in the popup window.
7. Either repeat steps 3-5 to add multiple attachments, or simply click the All Done button to close that popup window.
8. You should notice that the file is now displayed under the Manage Attachments link in the thread/post you are about to make.
9. Verify your post information and make sure you have titled your thread/post properly.
10. Click the Submit Reply button to complete your post.


Couple things to remember ..........

1) Make sure the file isn't bigger than 5 meg

2) The file has one of the proper extensions, which are listed in the upload window

(Thank you to Houdini for providing these instructions.)

 

[nessonite1]

Ahhh thank you Missy Val! Helpful to the end 😀

 

[His Divine Shadow]

1) Make sure the file isn't bigger than 5 meg

HDS has to stop adding things to stickies already...

Anywho, there is something to note with this: What a clip says its size is and its ACTUAL size is are two different things. For instance, if you click once on a clip, and it says on the left under 'Details' that it is 4.90 megabytes. All well and good so far, eh? Under 5.00 megabytes, eh? Well, you try to upload it and BAM!, the Theater rejects it as being too large. What's going on here? Well, going back to the file, right click on it and select "Properties" from the menu that pops up. Look at the numbers; See the number in parentheses? THAT is the actual size of the file. If it is over or close to (Read: within 100 kilobytes or so usually) the 5.00 megabyte limit, then it won't upload, despite it originally saying that it was merely 4.90 (Or whatever) megabytes in size. Moral: If a file won't upload, check the number in parentheses. If it is too big, you may be a candidate for one of the file splitters, eh?

 

[MistressValerie1]

To upload clips larger than 5MB but not more than 20 MB, please split the clip with HJSplit, Hacha, or WinRAR and upload it to The Splits forum (help here). Don't forget that all parts of split clips (other than WinRAR) need to be indivdually zipped before they can be uploaded here.

To share clips up to 100 MB, you may upload them to http://rapidshare.de and post the link in your message. (Please see the rules for The Splits before uploading.) 🙂

 

[Susie]

Click on "new thread" on the upper left of the screen, then the basic form will come up. Put in the title and the body of your post. Then you will notice below the body of the post (scroll down) you will see a button that says "manage attachments"; click on that. The next screen to come up will allow you to post clips. Click on the browse button and navigate to where the clip is on your computer, select it and click OK. Brings you back to the upload screen, then just select upload and wait a minute while the clip uploads. After that you will see your attachment associated witht he post, then just submit the post.

Step by step..........

1. Click the Manage Attachments link located in the new thread/post you're creating.
2. Wait for the popup window to load. If you use a popup blocker you may want to disable it just while you upload.
3. Once loaded click on the Browse button to navigate to the file on your computer you wish to upload.
4. When the desired file is selected and ready to be loaded click on the Add This File button.
5. Wait for the file to upload from your computer. The amount of time varies depending on file size. Additionally, I've found that files above 2mb do not load properly.
6. You will know the file is loaded when you see a Current Attachments table come up underneath the one you were just using in the popup window.
7. Either repeat steps 3-5 to add multiple attachments, or simply click the All Done button to close that popup window.
8. You should notice that the file is now displayed under the Manage Attachments link in the thread/post you are about to make.
9. Verify your post information and make sure you have titled your thread/post properly.
10. Click the Submit Reply button to complete your post.


Couple things to remember ..........

1) Make sure the file isn't bigger than 2 meg

2) The file has one of the proper extensions, which are listed in the upload window

(Thank you to Houdini for providing these instructions.)

Thanks Mistress, do you have a Sending Mechanism for Files larger than 2MBs?
Thanks
Susie

 

[MistressValerie1]

Hi, Susie,

Instructions for Rapidshare and other file hosts are here: http://www.tickletheater.com/showpost.php?p=139512&postcount=2

If your clips is under 22 MB total, you may also split it with Hacha, HJSplit, or WinRAR and post it in The Splits 🙂